Full Automatic Terminal Crimping Machine
Product_description
Product Description
CLN-06S
AUTOMATIC FINISHING MACHINE (1 WATER RESISTANT HEAD)
CHARACTERISTICS
• Automatic mounting of waterproof head, stripping and stamping of the core.
• The method of changing the stripping length is adjusted by the full-screen computer touch method, and the stripping length can be changed quickly and easily
• Servo motor control system is used to complete sizing, wire cutting, stripping and other actions, so the accuracy is higher, the operation is simpler, and the performance is more stable.
• Head stamping position, through the touch panel to adjust the head stamping position
• Stamping height is adjusted by a quick fine-tuning knob, with an accuracy of 0.02mm per square, can be adjusted manually without tools, very precise and convenient.
• Designed with 100 sets of memory functions, which can shorten the time of wire replacement and adjustment.
Specifications
|
Power supply |
AC 220V 50 HZ single phase |
|
Wire Specifications |
AWG# 12~22（standard） |
|
Air pressure |
0.5~0.6 Mpa（Need clean dry air） |
|
End stamping ability |
2.5 Ton（Servo End Stamping Machine） |
|
Speed |
4000 strands/hour（length within 300） |
|
Cut length |
Standard PVC glue length 32 ~ 9,999mm |
|
Stripping length |
No1 side 0mm-4mm、No2 side 0mm-7mm |
|
Function |
Wire cutting, stripping 1 end, stripping 2 ends, stamping 1 end, stamping 2 ends |
|
Test |
With or without power cord, overloaded wire, wire connector, die pressure sensor, no terminal, overloaded terminal, low air pressure |
|
Size |
1，100L*1，100w*1.850Hmm |
|
Weight |
About 450kgs |
