Full Automatic Terminal Crimping Machine
Product_description
Product Description
CL-RSB
AUTOMATIC STRUCTURING MACHINE (ONE BIG LINE)
CHARACTERISTICS
• Use computer touch to adjust the stripping length, end stamping position and depth adjustment, and easily change settings quickly.
• Using the servo motor control system set by the robot, and complete the sizing, wire cutting, sheathing, wire bending, etc., to make the accuracy higher, the operation is simpler. simpler, more stable features.
• Designed with a test device, which can automatically stop when abnormal and display the fault status on the control panel, which is convenient for quickly eliminating the situation and reducing the machine downtime.
• Head stamping position, through the touch panel to adjust the head stamping position
• Stamping height is adjusted by a quick fine-tuning knob, with an accuracy of 0.02mm per square, can be adjusted manually without tools, very precise and convenient.
• Designed with 100 sets of memory functions, which can shorten the time of wire replacement and adjustment.
SPECIFICATIONS
|
Function |
Wire cutting, stripping 1 end, stripping 2 ends, stripping 1 half 1 end, stripping half 2 ends, stamping 1 end, stamping 2 ends |
|
Power supply |
AC 220V/380V 50/60 HZ three phase |
|
Manipulation method |
Manual, run once, and run automatically (continuous) |
|
Efficiency |
4200 threads/hour ( length within 300） |
|
Cut length |
PVC length 12-100mm |
|
Cutting accuracy |
0.5mm or less |
|
Stripping length |
Front segment 0mm-9mm, rear segment 0mm-14mm |
|
Peeling depth |
100 steps 1mm (1 step = 0.01mm) |
|
Wire Specifications |
AWG#14-AWG#18（standard） |
|
Air pressure |
5-6kgs（Need clean dry air） |
|
End stamping ability |
2.5 Ton |
|
Test |
Stamping die pressure sensor, with no end, overloaded terminal, low air pressure |
|
Size |
1050L*730W*1900H mm |
|
Weight |
About 300kgs |
