Here are some points for attention from the automatic wire stripping machine manufacturer:

1. During the operation of the automatic wire stripping machine, if there are some abnormal noises or some abnormal reactions, then the power supply of the automatic wire stripping machine should be turned off immediately, and the maintenance personnel should be checked and debugged in time. Here, Jiahao Intelligent Machinery once again emphasizes that users of automatic wire stripping machines must find professionally designated people for maintenance and debugging, and non-professional maintenance personnel cannot be allowed to repair, otherwise it may be counterproductive.

2. The automatic wire stripping machine will produce a great impact during use. In order to ensure the safety of the staff, it is necessary to master the correct operation method, and special attention should be paid during the use. Compared with the general automatic wire stripping machine, the performance of the fully automatic wire stripping machine may be more perfect. Although it can realize automatic work, it still needs to master some basic operation methods.

3. When using the automatic wire stripping machine, first turn on the power switch, and the indicator light will be on. If it does not light up, there may be a fault problem, and a detailed inspection is required at this time. After turning on the power, don't rush to start work. The first thing you need to do is to pay attention to whether there is any abnormal noise inside the machine. If there is abnormal vibration or noise, you should stop it immediately and carry out maintenance. The selection and installation of knives for automatic wire stripping machines are also critical. The staff must have work experience. Before installing the knife, it should be determined whether it is matched, and then the knife should be installed. After the installation, it should be adjusted and checked.

4. In the process of using the automatic wire stripping machine, there are also many problems that need to be paid attention to. In order to ensure safety at work, it is required not to cut off the power at will, but also to pay attention to your own life safety, do not easily put your fingers or other parts. Touch dangerous parts of the automatic wire stripper. It is also very important to master the maintenance method of the automatic wire stripping machine. Only by doing basic maintenance work, the equipment will be more durable and durable.