Generally, the conditions that cause the automatic terminal machine to heat up are as follows. According to different reasons, different methods can be used to alleviate the problem.
1. Poor machine lubrication
For example, less lubricating oil, too much lubricating oil, bad oil, impurities, etc. will cause the friction loss of the equipment to become more severe, so it is not difficult to understand that the bearing is hot, as long as the lubrication of the automatic terminal machine is improved situation can overcome the problem.
2. The inner and outer rings of the steel ball bearing are unbalanced
If the inner and outer rings of the bearing are unbalanced, the friction will also be abnormal during the operation of the equipment, which can easily lead to abnormal heating of the equipment. As long as the position of the inner and outer rings of the bearing is adjusted properly, the problem can be solved.
3. The equipment has been operated for a long time without maintenance, and the function of parts and components has been damaged.
This problem will only occur after long-term accumulation, so usually you only need to pay attention to the maintenance of the equipment and keep the parts in good condition, so that the equipment will operate efficiently, and the probability of heat generation or other failures will be greatly reduced.
If the automatic terminal machine has been seriously overheated, then you should not continue to use it, you must stop it in time for inspection, and it is recommended to find a professional maintenance personnel to repair it.
