The automatic terminal machine can produce all kinds of wire harnesses, as long as it is simple to adjust, so the automatic terminal machine is also called the terminal machine, but in the use of the terminal machine, the vibration, the noise is also large when large vibration occurs, the noise not only affects the production, also affect human health. Therefore, the vibration of the terminal machine must be minimized. Next, the terminal machine manufacturer will introduce the steps to solve the noise problem of the terminal machine.
1. Check the condition of the terminal machine, and confirm that the power switch can be turned on when the equipment is normal. At this point, the power indicator lights up.
2. After starting the automatic terminal machine, listen carefully to see if there is any obvious noise. If there is abnormal noise, suspend the operation, check whether the equipment is faulty, and ask an expert to repair it if necessary.
3. The tool is very important to the terminal machine. The appropriate tool must be selected. The tool is operated by an expert. After the tool is completed, test whether the tool is installed and tightened. Also check the various fastening screws to make sure they are not loose.
4. Feeding, feeding must ensure that the feeding position is correct, adjust the feeding speed, and ensure that the feeding is carried out smoothly.
5. Maintenance should not be neglected in the process of using the terminal machine. After each use of the terminal machine, clean the terminal machine, clean the garbage, and get the equipment ready for the next job.
Xem thêm về văn bản nguồn nàyNhập văn bản nguồn để có thông tin dịch thuật bổ sung
Gửi phản hồi
Bảng điều khiển bên
