1. Turn on the power switch of the automatic terminal machine, wait for the high-strength polypropylene fiber to wait for the power indicator to light up, and then start the operation and debugging after all the mechanical positions are reset.
2. When debugging, repairing or maintaining any terminal machine, you must click the stop button of the touch screen and press the custom button to prevent injury during maintenance operations.
3. When it needs to be disassembled and replaced, or the blade problem can be checked at a close distance, the power supply can be uninterrupted, but the air source must be disconnected, otherwise accidental injury will easily occur.
4. The replacement of the blade must be operated by the designated maintenance personnel. For the replacement, first check whether the blade to be replaced matches, and then replace it after confirmation. After the high-strength polypropylene yarn is installed, it is necessary to perform a swing test by hand to confirm that the blade is installed in place without loosening, and then check the locking screws accordingly to ensure that there is no loosening.
5. After the maintenance and debugging are completed, install the terminal, try it once, and check whether there is any problem in all the action processes of the machine. After no problem, try to play a line. Guaranteed pass rate above 98%.
6. After the day's work is completed, the good and defective products are sorted out, and the environment around the clean machine is cleaned. Make sure that the power supply of the terminal unit is disconnected before leaving.
