A brief introduction to the functions of the main components of the computer wire cutting machine:
1 Incoming wire wheel: conveying wire and stripping out the end of the wire. When stripping short wires, the wire stripping machine strips both the wire head and the wire tail (the length of the wire is less than 50mm). When the wire stripping machine is stripping, in addition to stripping the wire head, it also has the function of stripping the middle.
2 Wire outlet pulley: Convey the wire and strip the wire tail for the wire stripper. (The stripping machine has no effect when stripping short wires, and the "cable pulley lifting knob" needs to be in the "u" position)
3. Adjustment knob for the gap of the wire feeder: adjust the wire feeder clearance of the wire stripping machine. The clearance increases when you rotate upwards, and decreases when you rotate downwards (adjusted according to the thickness of the wire).
4. Adjusting knob for thread-feeding wheel pressure of thread cutting machine: Adjust the thread-feeding roller pressure of wire stripping machine. After pulling out, rotate clockwise to increase the thread-feeding roller pressure. After pulling out, rotate counter-clockwise to decrease thread-feeding roller pressure. (It is determined according to the strength of the wire skin of the wire, that is, the difficulty of stripping the wire skin, the pressure will increase if it is difficult, and the pressure will decrease if it is easy)
5 Lifting knob of thread feeder: Raise the thread feeder when threading the stripper, turn the knob clockwise to lift the thread feeder, so that the wire can pass through smoothly; put down the thread feeder and turn the knob counterclockwise when working Reel, hold down the wire.
6 Adjustment knob for the gap between the wire outlet pulley: adjust the wire outlet pulley gap for the wire stripper, the upward rotation increases the clearance, and the downward rotation reduces the clearance (adjusted according to the thickness of the wire).
7 Outlet wheel pressure adjustment knob: Adjust the outlet wheel pressure for the wire stripper. After pulling it out, rotate it counterclockwise to increase the outlet wheel pressure. After pulling it out, rotate it clockwise to reduce the inlet wheel pressure. (It is determined according to the strength of the wire skin of the wire, that is, the difficulty of stripping the wire skin of the wire stripping machine, the pressure increases when it is difficult, and the pressure decreases when it is easy)
8 Lifting knob of the wire outlet pulley: Lift the wire outlet wheel when taking out the wire, turn the knob counterclockwise to lift the wire outlet wheel, so that the wire can be taken out smoothly; Put down the wire outlet wheel when working, and turn the knob clockwise to lower the wire outlet wheel . (When using the short stripping procedure, the outlet pulley should be raised)
9 Tool holder assembly: In the wire stripping machine, it is responsible for cutting the wire, stripping the head and the tail. When the machine is stopped, the upper and lower blades need to be opened to the maximum so that the wire can pass through the cutter smoothly.
