1. The production batch is large, and the specifications are many, and the straight plug-in is the main one. One machine can be used for general use without adjusting the machine. Compared with wave soldering, the efficiency is similar, but the cost is greatly reduced, and the quality is guaranteed.
2. There are manufacturers of instruments and equipment. There are many PCB specifications, but the number is very small. Manual tin dipping requires high proficiency of employees, and the cost of wave soldering is high. Therefore, automatic tin dipping furnaces are selected.
3. For some larger boards that will be deformed during the tin immersion process, our company has specially made a jig so that the PCB will not deform during the tin immersion process.
Automatic tin dip machine - dip tin method
As long as the substrate with the good flux is placed on the pin holder, and then press the start switch once, multiple pieces of various substrates can be soldered at one time. From the oblique angle of the substrate into the tin to the level of the tin immersion time and the angle of the tin out of the substrate, all are controlled by the microcomputer, which completely simulates the principle of manual tin immersion and the principle of wave soldering machine. It is more than 5 times of the manual speed, the quality is stable, and the production efficiency can be improved.
