When we use the automatic tin dipping machine, we need to observe the phenomenon when the automatic tin dipping machine crashes, and then analyze and deal with the phenomenon in detail:
1. Whether the total physical value is set to 0.
2. The preset value is reached otherwise.
3. Is the air pressure of the compressed air too low? The introduction of the treatment method for the failure of the tin dipping machine. Sometimes, when you are working overtime, your automatic tin dipping machine suddenly fails. It affects the work arrangement. In a larger scale, it is likely to cause a breach of contract, requiring huge liquidated damages. Therefore, when the tin dip machine crashes for no reason, we must find the cause of the crash, and only after finding the cause can we find the correct solution.
4. The vibration should be reduced when the automatic tin dip machine is used
5. In the production and processing process of using the automatic tin dipping machine, the use of the tool is very important. During the cutting process, the vibration of the tool is mainly manifested in the phenomenon of vibration when the length is long and the workpiece is thin. In the process of high-speed cutting, there will be a lot of noise, which will also cause harm to the human body. Correct and reasonable use of this automatic tin dip machine can greatly reduce noise and reduce vibration.
