The guide rail of the automatic wire stripping machine must have lubricating oil holes on the top of each terminal for 1 hour, 2-3 drops of gas is suitable, the operator must clean the machine every day, and the debris and excess grease on the surface of the machine must be cleaned at high speed. It is necessary to add butter to the bearing terminal every week, but remember not to add too much.
The specific operation method is as follows: open the back cover of the wire stripping machine, remove the collar and remove the driven pulley, butter (evenly spread on the surface of the high-speed bearing), and recover (note: during this process, the pulley should be disassembled with care Loss of bearing balls) After two-level repairs use the terminal machine for 3-6 months, it is necessary to check whether all parts (lost) need to be replaced with belts and other accessories, and springs are replaced with less elastic ones. Whether the mechanical locking screw is loose, check whether the spring is deformed.
This is the maintenance method of the automatic wire stripping machine. You can understand it and hope it will help.
