Daily maintenance knowledge of automatic terminal crimping machine
1. The mold fixture must be accurate and firm. Daily maintenance and maintenance knowledge of automatic terminal machine connection The mold gap is reasonable, and the mold edge is often kept sharp.
2. It is forbidden to overload the machine. For the workpiece to be processed, the punching force must not exceed the limit.
3. During the operation, the power supply of the machine is not disconnected, and the terminal crimping machine prohibits fingers or any part of the body from entering the stamping range to avoid industrial accidents.
4. For machine lubrication points and friction parts, pay attention to the ground refueling, and each level shall not be less than 2 times.
5. Always check whether all parts of the machine are working properly, and all chain links and fasteners are loose. If it is loose, tighten it in time. If there is mechanical wear, it must be replaced in time.
6. During the operation, if there is a terminal crimping machine stuck in the die, it must be removed with scissors or picking needles before continuing the operation.
